Electrical Safety Check in Dandenong by a South East Melbourne Electrician

Not sure the wiring in your older home or rental is safe? A local licensed electrician can test it and report what needs attention.

Electrical Safety Check in Dandenong by a South East Melbourne Electrician

Tell us about your project

Let us know about the electrical work and we'll send you a quote.

Include access and anything nearby that affects the job.

See our privacy policy.

An electrical safety check in Dandenong tests the wiring, switchboard, earthing and safety switches in your home or rental, so hazards turn up before they cause a shock or a fire. It suits older houses with original wiring, rentals due for their two-yearly check, and anyone who has moved into a place and has no idea what is behind the walls. Workshops and factories in Dandenong South that run on three-phase supply need more time on the main board and the circuits feeding machinery.

What is included

  • Switchboard inspection Old fuses, scorched connections and crowded circuits show up here first, and the board is where a fault is easiest to contain.
  • Safety switch testing A safety switch cuts the power quickly and lowers the risk of a serious shock, but only if it actually trips when tested.
  • Earthing check Poor earthing can leave metal parts live after a fault, so the path to ground needs to be sound.
  • Power points and switches Cracked plates, loose fittings and heat marks point to wiring problems behind the wall.
  • Smoke alarm review The check looks at whether your alarms match what the build date of the home requires.
  • Written safety report You get a record of what was tested and which hazards were found, which suits landlords, buyers and sellers.

How it works

  1. You describe the home

    Age of the house, whether it is a rental, and any flickering lights, warm switches or tripping you have noticed.

  2. Switchboard and safety switches

    The electrician opens the board, looks for damage and old fuses, and trip tests each safety switch.

  3. Wiring, earthing and fittings

    Power points, switches, lights and earthing are tested through the house, along with the smoke alarms.

  4. Report and a clear price for repairs

    You receive the findings in writing. Anything that needs fixing is quoted and agreed before work starts.

Electrical safety check in Dandenong: what a failed test looks like

A switch that looks fine can still fail. A failed trip test means the safety switch did not cut the power when the test put a small fault on the circuit. That switch needs replacing, and it is one of the most useful things a check can find.

Earth faults are found with a meter, not by eye. The tester measures whether a metal part, such as a stove casing or the earth pin of a power point, has a sound path to ground. An odd reading usually points to a loose or missing earth wire, and the electrician traces it back along the circuit.

Heat is the other clue. Discoloured plates, a faint plastic smell or a warm fitting show where a connection has worked loose. The written report lists each finding and marks which are urgent and which can wait.

How often does a rental need an electrical safety check?

A rental in Victoria needs a check at least every two years. Since March 2021, rental providers have had to get that check done by a licensed electrician.

For a landlord, the report is the proof the check happened and the list of anything that needs fixing. For a tenant, it means the wiring, switchboard and safety switches have been looked at by someone qualified.

Outdated power points in older homes

Older homes often have too few power points, so double adaptors and power boards end up carrying loads the wiring was never planned for. That is a common source of heat at the wall.

The check looks for cracked plates, loose fittings, brown marks and warm switches. Rubber or cloth-covered cables in the roof or walls are a bigger concern, because the insulation breaks down with age. An older house with original wiring and old fuses deserves a closer look at the board.

If wiring needs replacing, the electrician explains why and what it involves. If one worn part is the problem, the quote covers that repair instead. Repairs that follow the check come with a Certificate of Electrical Safety, which sits in the file next to the report.

Smoke alarms and the safety check

Smoke alarms are reviewed against the age of the house. A Victorian home built after August 1997 needs its alarms wired into 240-volt mains power. If the house went up after May 2014 and has two or more alarms, they must also be linked, so one going off sounds them all.

An older home may still have battery alarms only. The electrician can say what suits your house and quote the work to bring it up to standard.

Burning smell or a tripping breaker: do not wait for a check

Scorching on a switch plate, a hot smell at an outlet or a circuit that drops again straight after a reset is a fault, not a job for next month. Switch off at the board only if it is safe to do so, and stay clear of the area.

If you can see smoke or flames, or someone has had a shock, call 000.

For anything less dramatic, such as a dead power point or a bathroom point that cuts the power, the electrician tracks down the cause in person.

What drives the cost of a safety check

The size of the home matters most, since more circuits, power points and alarms mean more testing. An old switchboard with a tangle of wiring takes longer than a modern one.

Repairs found during the check are priced separately from the check itself. You decide on the fixes with a clear price in front of you.

Electrical Safety Checks options

  • Rental electrical safety check The two yearly check for Victorian rental providers, done by a licensed electrician, with a report to keep on file for the next one.
  • Older home wiring inspection Suited to houses never rewired, where ceramic fuses and cloth-covered cables in the roof are the main worry.
  • Pre-sale or pre-lease check Faults found and fixed before a buyer or tenant raises them, with a Certificate of Electrical Safety for any repair work.
  • Safety switch and smoke alarm testing Useful when a switch keeps tripping for no clear reason or the alarms are still battery only in a newer home.
  • Business premises safety check Built for sites on three-phase supply, where a fault can stop machinery and hold up the working day.

Frequently Asked Questions

How long does an electrical safety check take for a house or rental?

Most houses are done in a single visit, with a small unit finishing sooner than a large home with an old switchboard. The electrician can give a realistic time once they know the size of the place. Any repairs found along the way add to that.

Can I fix common electrical problems myself after a safety check?

Only simple steps are safe, such as resetting a safety switch once or unplugging the appliance that caused a trip. Anything involving wiring, power points or the switchboard belongs to a licensed electrician. If a switch trips again straight away, there is a fault that needs finding.

Get it priced

Breaker tripping or a power point gone dead? Tell us what is happening and get it sorted.

Let us know about the electrical work and we'll send you a quote.